DIY Panhard – Trackbar Kit

Description

This kit will insure that you get just the right parts to build your Panhard or Trackbar. Heims are 7/8 shank and you will run a 5/8 bolt on both ends!

If you choose to order any piece of this kit, individually, please see the list of of quantities and hyperlinks below.

DOM IS NOT INCLUDED 

Heims and hardware:

1- Right Hand 7/8 – 14 3/4 Heim

1- Left Hand 7/8 -14 3/4Heim

1- Left Hand 7/8 -14 Jam Nut

1- Right Hand 7/8 – 14 Jam Nut 

1- Right Hand 7/8 – 14 Hex Tube Insert 

1- Left Hand 7/8 – 14 Hex Tube Insert

2- 3/4 – 5/8 High Misalignment Spacer Pair 

2- 5/8 – 11 Grade 8 Bolt and Lock Nut Set 

Bracketry:

Outside the Frame Trackbar Bracket 

Inside the Frame Trackbar Bracket 

Offset Axle Trackbar Bracket 

Centered Axle Trackbar Bracket 

If you require DOM tubing, please see the following hyperlink

DOM Tubing 1.5 OD 1 ID (1/4 Wall) 4 Foot Section